Torque Wrench Information
Torque Wrench CalibrationAll torque wrenches fall into different categories based upon style of the manufacturer (Click, Beam, Dial or Digital Style)

Click Style:

The actual "Click" from a wrench is considered a "Cycle" of that wrench. Most manufacturers recommend calibration after 5000-to-7000 cycles.
For most customers, this means calibration every 9 months.

Electronic Calibration Reporting
Torque Tool RepairTeam Torque will give you FREE detailed information on each torque wrench calibrated. We will also provide a Certificate of Calibration sheet that will show the following for each torque wrench: Trending, location, status, range, set point (if preset), calibration specification, completion date, next calibration date, accuracy before and after calibration, and the technician that certified the wrench.


Torque Wrench Repair

Torque Wrench RepairA wrench coming into Team Torque first goes through an extensive initial inspection and basic cleaning procedures. Initial accuracy readings and evaluations are done. Should the wrench pass the initial inspection and readings, it is calibrated and certified to factory or national standards. If it does not pass the inspection, it is evaluated and estimated for a repair cost and depending on the needs of the tool the customer would be called. If it is found not to be repairable due to cost or condition, it may be condemned per your request.

Note: Free Traceable Paper Certificates are provided with
ALL
calibrations!

Lab Information

Lab Manager - Rich Sabot
rich.s@teamtorque.com


Turnaround time on torque calibration is typically less than 4 working days.

Current Torque Wrench Calibration Pricing

How to Send in Your Torque Tools!

Helpful Hints from the Wrench Lab Guys

  • Always work on clean threads.
  • Never use a torque wrench on a nut already tightened with a conventional wrench.
    For a accurate torque wrench reading the Final turn of the nut must be tightened with the torque wrench.
  • Use your torque wrench for tightening only!
    Always loosen or remove the studs or nuts with a standard wrench.
  • If using a dial type torque wrench be sure the dial and pointer are set correctly before applying torque.
  • Always wear proper safety gear when using a torque wrench.

  • Be a yardstick of quality. Some people aren't used to an environment where excellence is expected.”  
    - Steve Jobs